Air Connection:
This is a right angle 3/8” barbed to ½” threaded fitting that will screw into our T fitting. The brass fitting below will be screwed into this fitting to connect the air system inside the tube to our external supply insuring a leak proof algae bio reactor system.

The Hose Fittings:
This is a 1/4” threaded fitting with a 1/8th barbed end brass fitting. This will actually be installed inside of the right angle fitting above for a leak proof transition to our air lines inside the reactor cell. These will cost anywhere from 1.00 – 2.00 each.

Bubbles and Flow Control:
Our aeration system will be self contained and assembled inside each algae reactor cell. We will use a simple aquarium aeration stone and an inline check valve to let air into our reactor cell but keep the water from leaking out into our air system when the system is powered down.